TP200 touch probe RENISHAW
About TP200
The TP200 system components are:
- TP200 or TP200B probe body (the TP200B is a variant with increased vibration tolerance
- TP200 stylus module - choice of fixed overtravel forces: SF (standard force) or LF (low force)
- PI 200 probe interface
- SCR200 stylus changing rack
There is also an EO module (extended overtravel) which has the same overtravel force as the SF but provides increased operating range and protection in the probe Z axis.
TP200 system configuration
The TP200 system components are:
- TP200 or TP200B probe body (the TP200B is a variant with increased vibration tolerance
- TP200 stylus module - choice of fixed overtravel forces: SF (standard force) or LF (low force)
- PI 200 probe interface
- SCR200 stylus changing rack
There is also an EO module (extended overtravel) which has the same overtravel force as the SF but provides increased operating range and protection in the probe Z axis.
Features and benefits
- Strain-gauge technology offers excellent repeatability and precision 3D form measurement.
- Zero reseat errors.
- No lobing effect.
- 6-way measuring capability
- Stylus reach of up to 100 mm (GF styli)
- Rapid probe module changing without the need to re-qualify the stylus tips
- Life of >10 million triggers
TP200 / TP200B probe body
TP200The TP200 probe uses micro strain gauge transducers to deliver excellent repeatability and accurate 3D form measurement even with long styli.
The sensor technology gives sub-micron repeatability and eliminates the lobing characteristics encountered with kinematic probes. The solid state ASIC electronics within the probe ensure reliable operation over millions of trigger points.
The TP200B uses the same technology as TP200 but has been designed to have higher tolerance to vibration. This helps to overcome the problem of ’air’ trigger generation which can arise from vibrations transmitted through the CMM or when using long styli with faster positioning speeds.
Please note that we do not recommend the use of TP200B with the LF module or cranked/star styli.
TP200 specification
TP200 stylus modules
The stylus module is mounted on the TP200/TP200B probe body via a highly repeatable magnetic kinematic joint, providing a rapid stylus changing capability and probe overtravel protection.
There are three modules available, with 2 different overtravel forces.
SCR200 changing rack
SCR200The SCR200 provides automatic, high speed changing of up to six TP200 stylus modules. The SCR200 is powered by the separate probe interface, PI200, and provides features to facilitate safe stylus changing. The SCR200 is available in low force and standard force kits, where each kit comprises one SCR200 plus three stylus modules of the same force.
- Documentation TP200 (EN)
request information : Inquiry
RENISHAW
